• Case 4 X 1G

Surface Preparation

For use in dry, properly prepared interior environments only. All surfaces must be dry, sound, stable, and clean. Ensure surfaces are free from dust and dirt and any bond breaking materials (silicates, curing compounds, oils). Mechanically remove weak surfaces and any contaminants down to sound surface. Always finish cleaning by a final removal of contaminants by vacuum.

Application Procedures

Use chemical resistant gloves when handling.

Material Application

Substrates can be tested for absorbency onsite. Place a bottle-capful of clean water on the substrate, if it disappears into the substrate within a minute, substrate is considered absorbent.

Mixing

When using at full strength (neat) mix concentrate gently before use. When diluting, add concentrate to water and mix gently for 1-2 minutes or until homogeneous.